DIN 6795 Ground Clamping Washers

DIN 6795 Ground Clamping Washers
Conical shape, knurling one side with claws.
Material: Spring Steel 65Mn;
Surface treatment: Zinc plated;

Size	d1	Tol	d2	Tol	h	Tol	h1	Tol	s	Tol	m	Tol	d3 min	d4 min	d4 max	min
3	3.1	+0.30 0	6.2	0 -0.4	0.95	0 -0.15	0.15	0.20 0	0.6	0.05 -0.07	0.8	±0.1	5.5	3.6	4.1	28
4	4.1		8.2		1.15		0.2		0.8	+0.1 -0.1	1.2		7	4.7	5.2	32
5	5.2	+0.22 0	10.2		1.5	0 -0.25	0.4	0.3	1		2.0		8	5.7	6.2	36
								-0.1
6	6.1	0.30　 0	12.2		1.8	0 -0.3			1.2			±0.2	10	6.8	7.4	45
8	8.2		16.2		2.4	0 -0.45			1.4				13	9.2	9.8	45
10	10.2	0.40　 0	20.2	0 -0.5	2.6				1.6				16	11.2	11.9	45
12	12.4		24.2		2.6				1.6		2.6		18	13.7	14.4	45
16	16.4		32.3	0 -0.6	3.95				2.5	0.10 -0.22	4.5		24	17.7	18.4	60
20	20.5	0.50　 0	40.3		4.65			0.40 0	3				30	22.1	22.8	60
24	24.5		49.3		4.9				3		5		34	26.2	26.8	60

NFE 25-511 Contact Washer

NFE 25-511 Contact Washer
Conical shape, knurling one side.Made of spring steel 65Mn from professional China manufacturer.
Surface treatment: Zinc plated

• NFE 25-511 Light Series 
• NFE 25-511 Medium Series 
• NFE 25-511 Heavy Series 

Size	d	D	s	h max	h min.	Nr. Knurlings Minim	Mass Kg./1000
M 3	3,1	6	0,50	0,90	0,70	28	0,08
M 3	3,1	8	0,60	1,00	0,80	28	0,20
M 3	3,1	10	0,60	1,20	0,95	28	0,33
M 4	4,1	8	0,80	1,20	1,00	32	0,23
M 4	4,1	10	0,90	1,40	1,15	32	0,46
M 4	4,1	14	1,00	1,80	1,40	32	1,10
M 5	5,1	10	1,00	1,50	1,25	36	0,46
M 5	5,1	12	1,10	1,80	1,45	36	0,80
M 5	5,1	16	1,20	2,10	1,70	36	1,70
M 6	6,1	12	1,20	1,85	1,55	45	0,79
M 6	6,1	14	1,30	2,10	1,75	45	1,27
M 6	6,1	18	1,40	2,50	2,10	45	2,48
M 8	8,2	16	1,40	2,20	1,80	45	1,63
M 8	8,2	18	1,40	2,35	1,90	45	2,22
M 8	8,2	22	1,60	2,70	2,20	45	4,11
M 10	10,2	20	1,60	2,60	2,10	45	2,90
M 10	10,2	22	1,60	2,75	2,25	45	3,75
M 10	10,2	27	1,80	3,10	2,60	45	6,90
M 12	12,4	24	1,80	2,90	2,40	45	4,69
M 12	12,4	27	1,80	3,10	2,60	45	6,34
M 12	12,4	32	2,00	3,60	3,10	45	10,65
M 14	14,4	30	2,40	3,70	3,20	45	10,18
M 16	16,4	32	2,80	4,10	3,60	60	12,95
M 20	20,5	40	3,20	4,30	4,90	60	23,12

DIN 1481 Spring Pins

DIN 1481 , Spring Pins
Slotted type spring pins
Made of spring steel 65Mn

• DIN 1481 Type A , Spring Pins , chamfered doule ends, 
• DIN 1481 Type B,  Spring Pins,  Chamfered one end, the other end flat end;

Size: Dia.: 1.0mm - 16mm , Length: 10mm -150mm

DIN 11024 R pins

DIN 11024 , R pins
Single coil spring cotter pins.
Made of spring steel SAE1070, Zinc Plated, Size 1.0-8.0mm

DIN 11024 E - R Pins Standard as below:

Size	L1	d Wire Dia.	D	l
2.5×42	24	2,25	20	42
3.2×48	24	2,8	20	48
4.0×64	32	3,6	20	64
5.0×80	39	4,5	25	80
6.3×91	45	5,6	25	91
7.0×125	56	6,3	30	125
8.0×150	63	7	30	150

DIN 25201 Nord-Lock Washer

DIN 25201 , Nord Lock Washers

Products Name: Nord-Lock Washers, Wedge Lock washers Standard: DIN 25201 Finish: Dacromet; NL Sereis Nord Lokc Washers made of steel, SK5.

DIN 7967 Pal Nuts

DIN 7967 Pal Nuts Pal Nuts also name Self-locking Counter Nuts, Pal-nuts etc.. Standard: DIN 7967 Material: Spring Steel , Finish: Zinc Plated, H.D.G or Black oxide Size: M6-M56

DIN 9250S / DIN 9250 VS , Safety Lock Washer

DIN 9250S / DIN 9250 VS , Safety Lock Washer

Made of spring steel, Surface Black oxide, Size M3-M36

DIN 9250 standard as below:

Type S					Type VS
Size	d1	d2	s	h	Size	d1	d2	s	h
M2	2.2	4	0.35	0.6	M5	5.3	9	1	1.3
M3	3.2	5.5	0.45	0.9	M6	6.4	10	1	1.4
M4	4.3	7	0.5	1	M8	8.4	13	1.2	1.7
M5	5.3	9	0.6	1.1	M10	10.5	16	1.5	2
M6	6.4	10	0.7	1.2	M12	13	18	1.5	2.1
M8	8.4	13	0.8	1.4	M14	15	22	1.5	2.2
M10	10.5	16	1	1.6	M16	17	24	2	2.6
M12	13	18	1.1	1.7	M18	19	27	2	2.7
M14	15	22	1.2	2	M20	21	30	2	2.8
M16	17	24	1.3	2.1	M22	23	33	2	3
M18	19	27	1.5	2.3	M24	25.6	36	2.5	3.4
M20	21	30	1.5	2.4	M27	28.6	39	2.5	3.5
M22	23	33	1.5	2.5	M30	31.6	45	2.5	3.8
M24	25.6	36	1.8	2.7	M33	34.6	50	3	4.5
M27	28.6	39	2	2.9	M36	38	54	3	4.5
M30	31.6	45	2	3.2
M33	34.8	50	2.5	4
M36	38	54	2.5	4.2